Maxim Integrated MAX6710JUT, Multi-Voltage Supervisor, Active Low, Open Drain or Open Collector Output, 140ms Minimum Reset Timeout, SOT-23-6, -40°C ~ 85°C.
| Parameter | Value |
|---|---|
| Type | Multi-Voltage Supervisor |
| Mounting | Surface Mount |
| Voltage - threshold | 2.32V, 3.08V, Adj, Adj |
| Number of voltages monitored | 4 |
| Operating temperature | -40°C ~ 85°C (TA) |
| Reset | Active Low |
| Output | Open Drain or Open Collector |
| Package | Bulk |
| Reset timeout | 140ms Minimum |
| Case | SOT-23-6 |
The adjustable channels let you set thresholds for non-standard rails using an external resistor divider.
Note that this variant is RoHS non-compliant; if your BOM requires RoHS, verify the equivalent suffix or plan for a waiver.
Yes — the fixed thresholds of 2.32V and 3.08V directly monitor 2.5V and 3.3V rails, while the two adjustable channels can be set via external resistors to monitor a 1.8V rail or any other voltage.
The MAX6710JUT and MAX6710LUT share the same multi-voltage supervisor function and pinout, but differ in the fixed threshold voltages. The JUT variant monitors 2.32V and 3.08V; the LUT variant uses different factory-programmed thresholds. Confirm the exact threshold set against your rail voltages before substituting.
Yes, the reset output is open-drain (open collector), which allows it to be pulled up to any voltage within the device's absolute maximum rating and enables wired-OR connection with other open-drain outputs.