Skip to main content
Log in
Analog Devices MAX6710DUT-T — Power Management (PMIC / Gate Driver)

MAX6710DUT-T supervisor MPU, active production

MPNMAX6710DUT-T
End of Life

Maxim Integrated MAX6710DUT-T IC supervisor MPU, active production, bulk package, RoHS non-compliant.

$2.24Ref. price · indicative, final on quote
Analog Devices MAX6710DUT-T datasheet (PDF)
RoHSRoHS non-compliant
Series*
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX6710DUT-T specifications
ParameterValue
Series*
PackageBulk

Product details

The MAX6710DUT-T: This is a supervisor MPU — a voltage-monitoring IC that holds a microprocessor in reset until the supply rail stabilises, then releases it cleanly. It is the kind of part a board needs once per processor core to guarantee a known start-up state.

RoHS non-compliant — a BOM filter to check

If your assembly line runs only lead-free reflow profiles, this part will not pass the joint-integrity or exemption audit. For legacy or exempt applications (military, aerospace, medical implant, or high-reliability industrial where leaded solder is still permitted), the non-compliant status is not a blocker — but it must be flagged in the BOM's compliance declaration.

Bulk packaging — tube or tray delivery

The MAX6710DUT-T ships in bulk packaging, which typically means tubes or trays rather than tape-and-reel. For a rework lab or low-volume prototype run, bulk is fine — parts are handled individually. For a high-speed pick-and-place line, you will need to confirm the tube-to-reel transfer or order a reel variant if one exists in the family.

Frequently asked questions

What is the MAX6710DUT-T used for?

It is a supervisor MPU — a voltage-monitoring IC that holds a microprocessor in reset until the supply rail is stable, then releases it cleanly. It is used in processor-based systems to guarantee a known start-up state and to trigger a reset if the supply dips below the threshold.

Is the MAX6710DUT-T RoHS compliant?

No, the MAX6710DUT-T is marked RoHS non-compliant. It contains lead above the 0.1 % threshold and is not suitable for lead-free soldering processes under the EU RoHS directive. It is acceptable for legacy or exempt applications where leaded solder is permitted.

What package does the MAX6710DUT-T ship in?

It ships in bulk packaging — typically tubes or trays rather than tape-and-reel. This is fine for prototype or rework volumes; for high-speed pick-and-place, confirm tube-to-reel transfer or check for a reel variant in the family.