Maxim Integrated MAX6706RKA-T, Multi-Voltage Supervisor, 2 Channels, Active High, Push-Pull Output, 140ms Min Reset Timeout, SOT-23-8, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Type | Multi-Voltage Supervisor |
| Mounting | Surface Mount |
| Voltage - threshold | 2.63V, Adj |
| Number of voltages monitored | 2 |
| Operating temperature | -40°C ~ 125°C (TA) |
| Reset | Active High |
| Output | Push-Pull, Totem Pole |
| Package | Bulk |
| Reset timeout | 140ms Minimum |
| Case | SOT-23-8 |
The reset output is push-pull, totem-pole, so it drives the enable or reset pin of an MCU, FPGA, or SoC directly without an external pull-up. The 140ms minimum reset timeout holds the system in reset long enough for the regulated supplies to stabilise after a fault clears or during power-up sequencing.
The SOT-23-8 package keeps the footprint small — useful when the supervisor sits near the processor on a dense PCB rather than on a separate power-management board.
The reset timeout is a minimum of 140ms. That is the period the reset output stays asserted after all monitored voltages rise above their thresholds.
The reset output is active high — the pin goes high when a fault is detected and stays high during the timeout period. It drives the enable or reset input of devices that require a high level to hold reset.