Triple-rail supervisor in a SOT-23-8 footprint
The MAX6701SKA is a power supply monitor IC from Analog Devices that supervises three voltage rails simultaneously: one fixed-threshold channel at 2.93 V plus two adjustable channels set by external resistor dividers. The active-low reset output is push-pull totem pole, so it drives the microcontroller reset pin directly without needing an external pull-up resistor.
What the 120 ms minimum reset timeout buys you
The 120 ms minimum reset timeout holds the processor in reset long enough for all three monitored rails to stabilize after power-up — a common requirement for DSPs, FPGAs, and mixed-signal SoCs that sequence multiple core and I/O voltages.
Note that this part is listed as RoHS non-compliant, so it is not suitable for assemblies requiring EU RoHS exemption-free compliance; verify your BOM's environmental requirements before specifying.