Analog Devices MAX6384XS23D3 Simple Reset/Power-On Reset, Active Low, Push-Pull Output, 2.31V Threshold, 140ms Minimum Reset Timeout, SC-70-4, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting | Surface Mount |
| Voltage - threshold | 2.31V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C ~ 125°C (TA) |
| Reset | Active Low |
| Output | Push-Pull, Totem Pole |
| Package | Bulk |
| Reset timeout | 140ms Minimum |
| Case | SC-82A, SOT-343 |
The extended temperature range covers motor drives, outdoor telecom cabinets, and engine-bay electronics where the board sees both cold starts and hot soak. The SC-70-4 package handles the thermal cycling without issue, but watch the PCB copper pour for heat spreading if the part sits near a hot regulator.
Listed as Active with no LTB or EOL notice. RoHS compliance status is marked non-compliant. For RoHS-compliant ordering, use the lead-free suffix version (MAX6384XS23D3+).
Active low. The reset output goes low when the supply drops below the threshold and stays low for the 140ms timeout after the supply recovers.
The reset timeout is 140ms minimum. This is the duration the reset output remains asserted after the monitored voltage rises above the threshold.
No, this variant is marked RoHS non-compliant.