Analog Devices MAX6382XR46D3+T, Simple Reset/Power-On Reset, Active High, Push-Pull Output, 4.63V Threshold, 140ms Min Reset Timeout, SC-70-3, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Mounting | Surface Mount |
| Voltage - threshold | 4.63V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C ~ 125°C (TA) |
| Reset | Active High |
| Output | Push-Pull, Totem Pole |
| Package | Strip |
| Reset timeout | 140ms Minimum |
| Case | SC-70, SOT-323 |
Because the reset output is active high and push-pull, it sources and sinks current without needing an external pull-up resistor. This simplifies the board layout and saves one component per reset line. Verify that the downstream processor's reset input is active high — if it expects an active-low reset, this part will not work without an inverter.
The active status means no LTB risk for ongoing production.
The MAX6382XR46D3+T is active in production with ROHS3 compliance. No end-of-life or last-time-buy status has been announced.
Yes, the reset output is push-pull (totem pole) and active high, so it drives the load without an external pull-up resistor.
The reset timeout is 140ms minimum. After the monitored voltage rises above the threshold, the reset output stays asserted for at least 140ms before releasing.