Skip to main content
Log in
Analog Devices MAX4896ATP+T — Analog & Data Acquisition

MAX4896ATP+T 8-Channel Low-Side Driver, SPI, 410mA, 20-TQFN

MPNMAX4896ATP+T
End of Life

Maxim Integrated MAX4896ATP+T, 8-channel low-side power driver, SPI interface, 3-ohm typical Rds(on), 410 mA per channel, 2.7V to 5.5V load supply, 20-TQFN exposed pad, -40°C to 125°C.

$8.92Ref. price · indicative, final on quote
Packaging20-WQFN Exposed Pad
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX4896ATP+T specifications
ParameterValue
Input typeNon-Inverting
Output typeN-Channel
TypeRelay, Solenoid Driver
MountingSurface Mount
Voltage - load2.7V ~ 5.5V
Output current410mA
I/O channels8
InterfaceSPI
Operating temperature-40°C ~ 125°C (TA)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesStatus Flag
Rds on3Ohm
Case20-WQFN Exposed Pad
Fault protectionCurrent Limiting (Fixed), Open Load Detect, Over Temperature
Output configurationLow Side
Ratio - Input:Output1:8

Product details

Eight low-side channels with SPI control and diagnostics

The MAX4896ATP+T from Maxim Integrated is an 8-channel low-side power driver designed for driving relays, solenoids, and other inductive or resistive loads. Each of the eight N-channel outputs can sink up to 410 mA continuously, with a typical on-resistance of 3 ohms that keeps dissipation manageable on a 20-pin TQFN with exposed pad. The SPI interface handles channel control and status readback, including open-load detection, current limiting, and over-temperature fault reporting. A dedicated Status Flag output gives a hardware interrupt for fault conditions without polling the SPI bus.

Load supply and temperature range

The device is housed in a 20-TQFN with exposed pad (5 mm × 5 mm body).

ROHS3 compliant.

Frequently asked questions

Can I use MAX4896ATP+T with a 5V relay?

Yes. The load supply range of 2.7 V to 5.5 V covers a 5 V relay coil. Each channel can sink 410 mA, which is sufficient for most small-signal relays. Ensure the relay's coil current does not exceed 410 mA per channel.

What is the lead time for MAX4896ATP+T?

Lead time is confirmed at quote time against an RFQ. As an active-production part, it is generally available through the independent distribution channel.