Single-supply rail-to-rail output op-amp in 8-µMAX
The 12 MHz gain-bandwidth product and 17 V/µs slew rate give it enough loop gain and slew margin to handle audio-band signals and moderate-speed data acquisition without excessive distortion.
The 12 MHz gain-bandwidth product sets the usable closed-loop bandwidth: at a gain of 10, expect roughly 1.2 MHz small-signal bandwidth before the open-loop gain rolls off. The 17 V/µs slew rate is enough to reproduce a 5 V peak-to-peak sine wave up to about 540 kHz without slew-induced distortion — adequate for audio line drivers, active filters, and ADC front-end buffering.
It is not specified for industrial or automotive temperature ranges, so avoid it for outdoor, under-hood, or factory-floor designs without a qualification review. The supply current is 2 mA typical, which keeps the thermal rise low in the 8-µMAX package.