Low on-resistance, fast switching for precision analog paths
It is designed for routing analog or digital signals with minimal distortion, featuring a maximum on-resistance of 2.5 Ohm and switching times of 15 ns (tON) and 10 ns (tOFF).
Charge injection is rated at 5 pC, which is the amount of charge transferred to the load when the switch turns off. In a sample-and-hold or integrator circuit, this glitch energy can cause a voltage step on the hold capacitor — 5 pC is low enough that with a 10 nF hold cap the step is under 0.5 mV, keeping errors in the microvolt range. Off-leakage current is a maximum of 250 pA at 25°C, so the switch does not appreciably discharge a high-impedance node during the off state.
Supply voltage and temperature — design margin considerations
The supply range from 1.8 V to 5 V covers the common 1.8 V, 2.5 V, 3.3 V, and 5 V logic rails. The SOT-23-6 footprint is compact enough for dense PCB layouts in portable instrumentation or sensor interface modules.