Analog Devices MAX4492ASD+, quad general-purpose op-amp, 10 MHz GBW, 10V/µs slew rate, rail-to-rail output, 2.7 V to 5.5 V supply, -40°C to 125°C, 14-SOIC.
| Parameter | Value |
|---|---|
| Output type | Push-Pull, Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 1.5 mV |
| Voltage - supply span | 5.5 V |
| Current - supply | 800µA (x4 Channels) |
| Current - input bias | 50 pA |
| Current - output (Channel) | 50 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 10 MHz |
| Package | Tube |
| Slew rate | 10V/µs |
| Case | 14-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 4 |
It delivers a gain bandwidth product of 10 MHz and a slew rate of 10V/µs, operating from a single 2.7 V to 5.5 V supply. The four channels each supply 50 mA output current, making it suitable for driving ADC inputs, filter stages, or buffering sensor signals in motor drives, automotive ECUs, and industrial control modules.
Yes, the output type is Push-Pull, Rail-to-Rail, meaning the output can swing close to both supply rails.
Analog Devices offers other quad op-amps in the same 14-SOIC package. For a pin-compatible replacement, check the MAX4494 or MAX4495 series — they share the same footprint and supply range but differ in GBW and slew rate. Confirm the specific speed and drive requirements before substituting.