Single-supply general-purpose op-amp with rail-to-rail output
The input bias current is just 0.1 pA, making it suitable for high-impedance sensor interfaces.
The 20 V/µs slew rate supports large-signal swings up to several hundred kilohertz without significant distortion, which matters for active filters, waveform generation, or driving ADC inputs with fast edges. The 7 MHz gain-bandwidth product gives you about 700 kHz of usable small-signal bandwidth at a closed-loop gain of 10 — enough for audio, sensor conditioning, or control-loop compensation. If your design needs to pass a 100 kHz square wave cleanly, this part has the slew rate to keep the edges intact.
Rail-to-rail output and supply range for mixed-voltage boards
The rail-to-rail output lets the amplifier swing to within a few tens of millivolts of each supply rail, maximizing dynamic range in low-voltage single-supply designs.