Skip to main content
Log in
Analog Devices MAX4480AUK-T — Logic ICs

MAX4480AUK-T General Purpose Op Amp, Rail-to-Rail Output

MPNMAX4480AUK-T
End of Life

Maxim Integrated MAX4480AUK-T, General Purpose Amplifier, 1 Circuit, Rail-to-Rail Output, 140 kHz Gain Bandwidth, 0.08 V/µs Slew Rate, 2.5 V to 5.5 V Supply, SOT-23-5 Package, -40°C to 125°C.

$0.42Ref. price · indicative, final on quote
Analog Devices MAX4480AUK-T datasheet (PDF)
PackagingSC-74A, SOT-753
RoHSRoHS non-compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX4480AUK-T specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset1 mV
Voltage - supply span5.5 V
Current - supply50µA
Current - input bias0.1 pA
Current - output (Channel)17 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product140 kHz
PackageBulk
Slew rate0.08V/µs
CaseSC-74A, SOT-753
Number of circuits1

Product details

50 µA supply current — the battery-life enabler

The Maxim Integrated MAX4480AUK-T is a single general-purpose op amp that draws only 50 µA of supply current, making it a strong candidate for battery-powered and always-on sensor interfaces where every microamp counts. Input bias current is 0.1 pA typical, suiting high-impedance sources like photodiode or pH probe front-ends.

SOT-23-5 footprint and temperature range

Surface-mount assembly is standard; no special reflow profile beyond the usual for small-outline packages.

Active lifecycle — no obsolescence worry

The part is listed as RoHS non-compliant — verify your assembly's regulatory requirements.

Frequently asked questions

Can MAX4480AUK-T be used as a rail-to-rail output op amp in low-power designs?

Yes. The rail-to-rail output combined with 50 µA supply current makes it well suited for low-power, single-supply signal chains such as battery monitors, temperature sensors, and portable instrumentation where the output must swing close to the supply rails.

Is MAX4480AUK-T compatible with MCP6001?

Both are single general-purpose op amps in SOT-23-5 with rail-to-rail output and similar supply ranges. The MAX4480AUK-T draws 50 µA supply current versus the MCP6001's 100 µA typical, and the MAX4480AUK-T operates up to 125°C versus the MCP6001's 85°C or 125°C variants. Pin compatibility should be verified against the respective datasheets — the footprint matches, but the pinout may differ.