Skip to main content
Log in
Analog Devices MAX4476ATT+T — DC-DC Power Modules

MAX4476ATT+T General Purpose Op-Amp, 10 MHz

MPNMAX4476ATT+T
End of Life

Maxim Integrated MAX4476ATT+T, General Purpose Amplifier, 1 Circuit, Rail-to-Rail, 10 MHz Gain Bandwidth, 3 V/µs Slew Rate, 2.7 V to 5.5 V Supply, -40°C to 125°C, 6-TDFN Exposed Pad.

$3.0Ref. price · indicative, final on quote
Packaging6-WDFN Exposed Pad
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX4476ATT+T specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset70 µV
Voltage - supply span5.5 V
Current - supply2.5mA
Current - input bias1 pA
Current - output (Channel)48 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product10 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate3V/µs
Case6-WDFN Exposed Pad
Number of circuits1

Product details

What this single op-amp delivers

It combines a 10 MHz gain-bandwidth product with a 3 V/µs slew rate, rail-to-rail output swing, and a supply range from 2.7 V to 5.5 V. The 1 pA input bias current and 70 µV input offset voltage suit precision signal conditioning in sensor interfaces, ADC drivers, or active filters where DC accuracy matters.

Sourcing and lifecycle — no LTB watch needed

That output current, combined with the rail-to-rail swing, makes this op-amp a practical choice for driving a single-ended ADC input or a low-impedance analog bus without an extra buffer stage.

Frequently asked questions

Can MAX4476ATT+T be used as a drop-in replacement for MAX4475?

The MAX4476ATT+T and MAX4475 share the same general-purpose op-amp core (10 MHz GBP, 3 V/µs slew rate, rail-to-rail output), but the MAX4476 is a single-channel version in a 6-TDFN package, while the MAX4475 typically comes in a different package with a different pinout. They are not drop-in replacements; verify the pinout and package compatibility for your board.