Maxim MAX4475AUA+, single general-purpose op-amp, 10 MHz gain bandwidth product, 3V/µs slew rate, rail-to-rail output, 2.7V to 5.5V supply, -40°C to +125°C, 8-uMAX/uSOP package, Tube.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 70 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 2.5mA |
| Current - input bias | 1 pA |
| Current - output (Channel) | 48 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 10 MHz |
| Package | Tube |
| Slew rate | 3V/µs |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
| Number of circuits | 1 |
The Maxim MAX4475AUA+ is a single general-purpose operational amplifier in an 8-uMAX/uSOP surface-mount package. The input bias current sits at 1 pA and input offset voltage at 70 µV. Output can source or sink 48 mA.
The 8-uMAX/uSOP footprint (3 mm × 3 mm body) saves board space on multi-layer designs. ROHS3 compliant, no exemption issues for EU or California markets.
This part is sourced through independent distribution. Submit an RFQ for current availability and pricing — confirmed at quote time, no obligation.
Yes, the output type is rail-to-rail, so the output can swing close to both supply rails — useful in low-voltage single-supply designs.
The gain-bandwidth product is 10 MHz, giving a usable closed-loop bandwidth of roughly 1 MHz at a gain of 10.
The slew rate is 3V/µs. This is fast enough for audio-band signals and moderate-speed ADC drivers but not for high-speed video or RF paths.