The MAX4292EUA-TG069: The 500 kHz gain-bandwidth product sets the usable frequency range for closed-loop gain. The 0.2 V/µs slew rate limits large-signal response.
Low power, dual-channel — fits tight supply budgets
Each amplifier draws 100 µA of supply current, totaling 200 µA for both channels. This keeps the power contribution negligible in battery-operated instruments, portable medical devices, or IoT sensor nodes. The input bias current is 15 nA, and input offset voltage is 200 µV — typical for a general-purpose CMOS-input stage, adequate for non-critical DC accuracy.
Package and supply flexibility
Housed in the 8-µMAX package (3.00 mm × 3.00 mm body, 0.65 mm pitch), the MAX4292EUA-TG069 is a surface-mount device for compact PCB layouts. The 1.8 V minimum supply allows operation from two alkaline cells or a single Li-ion cell near end-of-discharge; the 5.5 V maximum covers standard 5 V logic rails. Output can source or sink 20 mA per channel, sufficient to drive ADC inputs or small signal relays.