Maxim Integrated MAX4240EUK+T, Beyond-the-Rails™ series, general-purpose op-amp, 1 circuit, rail-to-rail output, 90 kHz GBW, 0.04 V/µs slew rate, 14 µA supply, SOT-23-5, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Series | Beyond-the-Rails™ |
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 250 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 14µA |
| Current - input bias | 2 nA |
| Current - output (Channel) | 2.5 mA |
| Operating temperature | -40°C ~ 85°C |
| Gain bandwidth product | 90 kHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 0.04V/µs |
| Case | SC-74A, SOT-753 |
| Number of circuits | 1 |
It delivers a rail-to-rail output stage that swings within millivolts of both supply rails, maximizing dynamic range in low-voltage systems. With a gain-bandwidth product of 90 kHz and a supply current of 14 µA, this part is sized for battery-powered sensor conditioning, portable instrumentation, and single-supply signal chains where every microamp counts.
The SOT-23-5 package keeps board area small, which helps in space-constrained designs like portable probes or distributed I/O modules.
The gain-bandwidth product is 90 kHz, which sets the usable frequency range for closed-loop gain configurations. At a gain of 10, the -3 dB bandwidth is approximately 9 kHz.
Yes, the MAX4240EUK+T features a rail-to-rail output stage that swings within millivolts of both supply rails, maximizing dynamic range in low-voltage single-supply designs.
Within the Beyond-the-Rails™ series, the MAX4240EUK+T is a single-channel device. A dual-channel sibling, the MAX4241, shares the same 90 kHz GBW, rail-to-rail output, and 14 µA supply current, but comes in an 8-pin package. Pin compatibility depends on the circuit count required.