Maxim Integrated MAX4231AUT+T, General Purpose Amplifier, 1 Circuit, Rail-to-Rail Output, 10 MHz GBW, 10 V/µs Slew Rate, 2.7 V to 5.5 V Supply, SOT-23-6, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 850 µV |
| Voltage - supply span | 5.5 V |
| Current - supply | 1.2mA |
| Current - input bias | 50 pA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 10 MHz |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Slew rate | 10V/µs |
| Case | SOT-23-6 |
| Number of circuits | 1 |
The MAX4231AUT+T is a single general-purpose operational amplifier in a SOT-23-6 package, designed for signal conditioning, active filtering, and sensor interface circuits.
The 10 MHz gain-bandwidth product and 10 V/µs slew rate support audio-band processing and ADC driver stages. The 1.2 mA supply current per amplifier is moderate.
The SOT-23-6 package is small enough for space-constrained PCBs.
It is a general-purpose op-amp, not a comparator. While an op-amp can be pressed into comparator service at low speed, the lack of a dedicated latch, output stage designed for saturation recovery, and internal hysteresis means it is not recommended for reliable comparator duty. Use a dedicated comparator for that function.