Maxim Integrated MAX4220ESD-T, quad voltage-feedback op-amp, 600V/µs slew rate, 200 MHz -3dB bandwidth, rail-to-rail output, 3.15 V to 11 V supply, 14-SOIC package, -40°C to 85°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting type | Surface Mount |
| Amplifier type | Voltage Feedback |
| Voltage - input offset | 4 mV |
| Voltage - supply span | 3.15 V |
| Current - supply | 5.5mA (x4 Channels) |
| Current - input bias | 5.4 µA |
| Current - output (Channel) | 120 mA |
| Operating temperature | -40°C ~ 85°C |
| -3db bandwidth | 200 MHz |
| Package | Bulk |
| Slew rate | 600V/µs |
| Case | 14-SOIC (0.154\", 3.90mm Width) |
| Number of circuits | 4 |
The Maxim Integrated MAX4220ESD-T is a quad voltage-feedback op-amp in a 14-SOIC package, built for high-speed analog paths where settling time and large-signal bandwidth matter. The rail-to-rail output stage lets it swing close to the supply rails, useful when driving single-supply ADCs or cable loads with limited headroom.
Each amplifier draws 5.5 mA supply current. Input offset voltage is 4 mV and input bias current is 5.4 µA.
Engineers need the datasheet to verify pinout, electrical characteristics, and application circuits for design-in.
Buyers need immediate sourcing options and reliable distributors to place orders.
Cost is critical for BOM budgeting and comparison across suppliers.
Lifecycle status determines whether the part is still available or needs a last-time buy or replacement.
Designers and buyers need drop-in replacements for supply chain flexibility or second sourcing.
PCB layout requires correct pin mapping, especially for multi-channel op-amps.