10 MHz GBW with 4 V/µs slew rate — where the speed fits
The MAX4131EPA is a single general-purpose op-amp with a 10 MHz gain-bandwidth product and 4 V/µs slew rate.
Supply range and quiescent current — single-supply readiness
Supply span runs from 2.7 V minimum to 6.5 V maximum. Quiescent current is 1 mA per amplifier.
Through-hole 8-DIP — prototyping and retrofit fit
The MAX4131EPA comes in an 8-DIP (0.300", 7.62 mm) through-hole package with the supplier device package listed as 8-PDIP. This is the form factor for breadboard prototyping, socketed designs, and rework-friendly layouts. For a production board that already uses through-hole, it avoids a surface-mount conversion. The Bulk shipping medium means it arrives in tubes or loose — not tape-and-reel — so factor that into your pick-and-place planning if you are running high-volume assembly.
Temperature range and operating environment
Not rated for extended automotive under-hood or downhole environments, but fine for most commercial and industrial enclosures where ambient stays below 85°C.