Skip to main content
Log in
Analog Devices MAX4092ASA+ — Analog & Data Acquisition

MAX4092ASA+ General Purpose Op-Amp, 500 kHz

MPNMAX4092ASA+
End of Life

Maxim Integrated MAX4092ASA+, dual general-purpose op-amp, 500 kHz GBW, rail-to-rail output, 2.7 V to 6 V supply, 130 µA per channel, -40°C to 125°C, 8-SOIC package.

$3.07Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX4092ASA+ specifications
ParameterValue
Output typeRail-to-Rail
MountingSurface Mount
Amplifier typeGeneral Purpose
Voltage - input offset30 µV
Voltage - supply span2.7 V
Current - supply130µA (x2 Channels)
Current - input bias20 nA
Operating temperature-40°C ~ 125°C
Gain bandwidth product500 kHz
PackageTube
Slew rate0.2V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

What this dual op-amp brings to the board

Gain-bandwidth product is 500 kHz, slew rate 0.2 V/µs, supply span 2.7 V to 6 V, temperature range -40°C to 125°C.

Rail-to-rail output — why it matters for single-supply designs

The rail-to-rail output lets the MAX4092ASA+ swing within millivolts of the supply rails, preserving headroom at 2.7 V minimum supply without an extra negative rail.

Low offset and bias current — what they mean for DC accuracy

For a general-purpose amplifier those numbers are tight enough to avoid output-stage trimming in most precision DC-coupled circuits — think thermocouple amplifiers, strain-gauge bridges, or current-sense front-ends where a few millivolts of drift would corrupt the measurement.

It remains a current-production part.

Frequently asked questions

Does MAX4092ASA+ have rail-to-rail output?

Yes, the output type is rail-to-rail, allowing the output to swing close to the supply rails — critical for single-supply ADC drive or low-voltage signal chains.

What is the slew rate of MAX4092ASA+?

The slew rate is 0.2 V/µs, which is typical for a 500 kHz GBW general-purpose op-amp and adequate for audio-band signals and slow sensor outputs.

What package does MAX4092ASA+ come in?

It is supplied in an 8-SOIC surface-mount package (0.154", 3.90 mm width), shipped in Tube format.