Skip to main content
Log in
Analog Devices MAX4051AEEE+ — Analog & Data Acquisition

MAX4051AEEE+ 8:1 Analog Multiplexer, 100 Ohm, 16-QSOP

MPNMAX4051AEEE+
End of Life

Maxim Integrated MAX4051AEEE+, 8:1 single-ended CMOS analog multiplexer/demultiplexer, 100 Ohm max on-resistance, 2 pC charge injection, -90 dB crosstalk at 100 kHz, single supply 2 V to 16 V or dual ±2.7 V to ±8 V, -40°C to +85°C, 16-pin QSOP.

$6.4Ref. price · indicative, final on quote
Analog Devices MAX4051AEEE+ datasheet (PDF)
Packaging16-SSOP (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX4051AEEE+ specifications
ParameterValue
MountingSurface Mount
Voltage - supply, dual (V±)±2.7V ~ 8V
Voltage - supply, single (V+)2V ~ 16V
Current - leakage (IS(off))100pA
Operating temperature-40°C ~ 85°C (TA)
PackageTube
Crosstalk-90dB @ 100kHz
Case16-SSOP (0.154\", 3.90mm Width)
Charge injection2pC
Number of circuits1
On-State resistance100Ohm
Switch time (Ton, toff)175ns, 150ns
Multiplexer (Demultiplexer circuit)8:1
Channel capacitance (CS(off), CD(off))2pF, 2pF
Channel-to-Channel matching (ΔRon)6Ohm (Max)

Product details

What this 8:1 CMOS multiplexer does

The Maxim Integrated MAX4051AEEE+ is a single-ended 8:1 analog multiplexer/demultiplexer in a 16-pin QSOP package. It routes one of eight analog inputs to a common output (or the reverse as a demultiplexer) with a maximum on-resistance of 100 ohms and channel-to-channel matching held to 6 ohms max. The switch topology is break-before-make, so the output never sees two inputs shorted during transition. It runs on a single supply from 2 V to 16 V, or dual supplies from ±2.7 V to ±8 V. Key specs for analog signal integrity: -90 dB crosstalk at 100 kHz; 2 pC charge injection; off-leakage is 100 pA max.

Frequently asked questions

How many channels does MAX4051AEEE+ have?

It is a single 8:1 multiplexer/demultiplexer — one common output and eight selectable inputs (or the reverse direction).

Can MAX4051AEEE+ be used as a demultiplexer?

Yes. The 8:1 circuit is bidirectional — route the common pin to one of eight outputs by setting the address lines.

What is the difference between MAX4051AEEE+ and MAX4051AEEE+T?

The suffix 'T' indicates tape-and-reel packaging; the MAX4051AEEE+ ships in tubes. The die and electrical specifications are identical.

Is MAX4051AEEE+ equivalent to DG408?

Both are 8:1 single-ended CMOS multiplexers with similar pinouts, but verify the supply range and on-resistance against your design. The MAX4051AEEE+ runs from 2 V to 16 V single or ±2.7 V to ±8 V dual, with 100 ohm max on-resistance. Check the DG408 datasheet for its own ratings — they are not guaranteed drop-in equivalents without a pin-to-pin and spec review.