Skip to main content
Analog Devices MAX3370EXK — DC-DC Power Modules
Analog Devices

MAX3370EXK Voltage Level Translator, 3 Mbps, SC-70-5

MPNMAX3370EXK
End of Life

Analog Devices MAX3370EXK, Voltage Level Translator, Bidirectional, 1 Circuit, 1 Channel, 3 Mbps, SC-70-5, -40°C to 85°C.

$1.58Ref. price · indicative, final on quote
MAX3370EXK datasheet
Packaging5-TSSOP, SC-70-5, SOT-353
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

MAX3370EXK Technical Specifications
ParameterValue
Output typeOpen Drain, Push-Pull, Tri-State
Channel typeBidirectional
Mounting typeSurface Mount
Translator typeVoltage Level
Voltage - VCCA1.6 V ~ 5.5 V
Voltage - VCCB2.5 V ~ 5.5 V
Operating temperature-40°C ~ 85°C (TA)
PackageBulk
Data rate3Mbps
Case5-TSSOP, SC-70-5, SOT-353
Number of circuits1
Channels per circuit1

Product details

Single-channel bidirectional level shifter for mixed-voltage boards

The MAX3370EXK is a single-channel bidirectional voltage level translator. VCCA accepts 1.6 V to 5.5 V, and VCCB accepts 2.5 V to 5.5 V. Data rate is 3 Mbps. Output can be open-drain, push-pull, or tri-state. The channel is bidirectional. Packaged in SC-70-5.

3 Mbps data rate — what it means for bus selection

The 3 Mbps data rate sets a practical ceiling for the signal speed this translator can pass without distortion. For I2C, standard mode and fast mode are within margin. SPI at 3 MHz or lower works. For UART at common baud rates, the 3 Mbps limit is not a constraint.

Active lifecycle — no LTB pressure

This is a standard-shelf part for new designs and ongoing production. Note the RoHS compliance status is listed as non-compliant, so verify your assembly house's exemption policy if you require RoHS conformance.

Frequently asked questions

Does MAX3370EXK support 1.8V to 3.3V level shifting?

Yes. VCCA accepts 1.6 V to 5.5 V, and VCCB accepts 2.5 V to 5.5 V, so a 1.8 V to 3.3 V shift is within the specified range. Connect the 1.8 V supply to VCCA and the 3.3 V supply to VCCB.

What is the closest pin-compatible alternative to MAX3370EXK?

Within the same family, the MAX3371E offers a higher data rate (20 Mbps) in the same SC-70-5 footprint and pinout, making it a drop-in upgrade for faster buses. For a lower-cost option with the same 3 Mbps rating, the MAX3370E is the standard version without the extended temperature range.

What is MAX3370EXK's listed data rate?

The listed data rate is 3 Mbps. This is the maximum guaranteed rate; actual performance depends on load capacitance and supply voltage.