Multi-protocol transceiver at 10 Mbps
The MAX3160EEAP+ is a full-duplex transceiver from Analog Devices that handles RS232, RS422, and RS485 on a single chip — a single BOM line covers three serial standards. The 10 Mbps data rate is the ceiling for RS422/RS485 modes; RS232 mode typically runs lower, but the part does not limit the design to one protocol. Supply voltage spans 3V to 5.5V — drop it onto a 3.3V rail or a legacy 5V bus without a level shifter. The 500 mV receiver hysteresis cleans up noisy lines, reducing bit errors on long cable runs.
Industrial temp and package fit
The 20-SSOP package (0.209" body width, 5.30 mm) is a standard footprint for multi-protocol transceivers. Surface-mount assembly with tube delivery — the tube quantity matches typical engineering build volumes and small production runs.
ROHS3 compliant, so it passes into European and California-restricted markets without exemption paperwork. Sourced through our distribution network against an RFQ.