Skip to main content
Log in
Analog Devices MAX3096EEE+ — DC-DC Power Modules

MAX3096EEE+ RS-422/RS-485 Receiver, 10Mbps, 3V-3.6V

MPNMAX3096EEE+
End of Life

Maxim Integrated MAX3096EEE+, Quad RS-422/RS-485 Receiver, 10Mbps data rate, 3V to 3.6V supply, 45mV hysteresis, -40°C to +85°C, 16-SSOP/QSOP, Tube, ROHS3.

$7.98Ref. price · indicative, final on quote
Packaging16-SSOP (0.154", 3.90mm Width)
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

MAX3096EEE+ specifications
ParameterValue
TypeReceiver
MountingSurface Mount
Voltage3V ~ 3.6V
ProtocolRS422, RS485
Operating temperature-40°C ~ 85°C
PackageTube
Data rate10Mbps
Case16-SSOP (0.154\", 3.90mm Width)
Receiver hysteresis45 mV
Number of drivers (Receivers)0/4

Product details

Quad RS-485/RS-422 receiver for 3.3V industrial buses

The Maxim Integrated MAX3096EEE+ is a quad RS-422/RS-485 line receiver in a compact 16-pin SSOP (0.154" wide, 3.90 mm body) or equivalent QSOP footprint. It converts differential bus signals to single-ended CMOS logic levels at up to 10 Mbps, with 45 mV of built-in hysteresis to reject noise on long cable runs. The part operates from a 3V to 3.6V supply and is specified over the full industrial temperature range of -40°C to +85°C, making it a direct fit for factory automation, motor drive feedback links, and outdoor telecom backplanes.

Supply and temperature grade — 3.3V rail, industrial environment

Rated for 3V to 3.6V, the receiver runs directly from a 3.3V supply without a separate regulator. If the design must survive under-hood automotive or extended high-temp industrial zones, a wider-range or AEC-Q100 qualified part would be needed.

Frequently asked questions

Is MAX3096EEE+ compatible with 3.3V systems?

Yes, the supply range is 3V to 3.6V, so it runs directly from a 3.3V rail. The logic outputs are CMOS-level compatible with 3.3V controllers and FPGAs.

Can MAX3096EEE+ be used as an RS-485 transceiver?

The MAX3096EEE+ is a receiver-only device — it handles the receive side of RS-485/RS-422 (0 drivers, 4 receivers,). For a full transceiver (driver + receiver), you would need a complementary part such as the MAX3072 or a quad transceiver like the MAX1487.