Linear LED driver with PWM dimming — what the ratings mean for your BOM
Its input supply range spans 6.5 V to 40 V. Applications include backlight, general lighting, and signage.
100 mA per channel — sizing the LED string
The 100 mA output current sets the maximum drive per LED channel. For a single LED string, this means the total forward current of the series LEDs must not exceed 100 mA. If the design calls for higher current per channel, this part is not the fit — look to a higher-current linear or switching driver instead. The 39.6 V output ceiling allows strings of up to roughly 10 to 12 white LEDs in series, depending on their forward voltage.
6.5 V to 40 V input — rail compatibility
The 6.5 V minimum supply means the driver will not operate from a 5 V rail; it needs at least a 12 V or higher supply. The 40 V maximum handles 24 V industrial rails with margin, and covers automotive load-dump transients if the supply is clamped below 40 V. For designs running from a 12 V battery, the 6.5 V min also covers cold-crank conditions down to about 7 V.
Package and thermal — 8-SOIC with exposed pad
For new designs, this part carries no imminent obsolescence risk.