Skip to main content
Log in
Analog Devices LTC6362CDD#PBF — DC-DC Power Modules

LTC6362CDD#PBF Differential Op-Amp, 180 MHz, 45 V/µs, 8-DFN

MPNLTC6362CDD#PBF
End of Life

Analog Devices LTC6362CDD#PBF, Differential Amplifier, 1 Circuit, Differential/Rail-to-Rail Output, 180 MHz GBP, 45 V/µs Slew Rate, 2.8-5.25 V Supply, 8-WFDFN Exposed Pad, 0°C to 70°C, Tube.

$5.01Ref. price · indicative, final on quote
Analog Devices LTC6362CDD#PBF datasheet (PDF)
Packaging8-WFDFN Exposed Pad
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LTC6362CDD#PBF specifications
ParameterValue
Output typeDifferential, Rail-to-Rail
MountingSurface Mount
Amplifier typeDifferential
Voltage - input offset75 µV
Voltage - supply span5.25 V
Current - supply1mA
Current - input bias75 nA
Operating temperature0°C ~ 70°C
-3db bandwidth34 MHz
Gain bandwidth product180 MHz
PackageTube
Slew rate45V/µs
Case8-WFDFN Exposed Pad
Number of circuits1

Product details

Differential ADC driver with 180 MHz GBP

The LTC6362CDD#PBF is a single-channel differential amplifier from Analog Devices. Its 180 MHz gain-bandwidth product and 45 V/µs slew rate support signal conditioning up to the low-MHz range with minimal distortion.

Supply voltage and input offset — fit check

Supply span runs from 2.8 V to 5.25 V. Input offset voltage is 75 µV typical. Input bias current is 75 nA.

Package and footprint: 8-DFN (3x3 mm)

The DFN package is compact but demands careful solder paste stencil design.

The commercial temperature grade and DFN package are the main constraints — not lifecycle risk.

Frequently asked questions

What are alternatives to LTC6362CDD#PBF?

The AD8475BRMZ from Analog Devices is a functional peer — also a single differential amplifier with rail-to-rail output, 150 MHz bandwidth, and 50 V/µs slew rate. The AD8475 offers a wider industrial temperature range (-40°C to 85°C) versus the LTC6362's 0°C to 70°C commercial grade, which may matter for extended-temperature designs. Pin compatibility should be verified against the respective datasheets.