Analog Devices LTC6262HMS8#PBF, dual general-purpose op-amp, 30 MHz gain-bandwidth, 7 V/µs slew rate, rail-to-rail output, 1.8 V to 5.25 V supply, 8-MSOP package, -40°C to 125°C.
| Parameter | Value |
|---|---|
| Output type | Rail-to-Rail |
| Mounting | Surface Mount |
| Amplifier type | General Purpose |
| Voltage - input offset | 50 µV |
| Voltage - supply span | 5.25 V |
| Current - supply | 245µA (x2 Channels) |
| Current - input bias | 10 nA |
| Current - output (Channel) | 40 mA |
| Operating temperature | -40°C ~ 125°C |
| Gain bandwidth product | 30 MHz |
| Package | Tube |
| Slew rate | 7V/µs |
| Case | 8-TSSOP, 8-MSOP (0.118\", 3.00mm Width) |
| Number of circuits | 2 |
It operates from a single supply spanning 1.8 V to 5.25 V, draws 245 µA per channel, and delivers rail-to-rail output swing. Output current capability is 40 mA per channel. This combination suits it for low-power sensor conditioning, ADC driver stages, and active filters in industrial, automotive, and portable equipment where board space is tight.
The 8-MSOP body (0.118-inch width) keeps the footprint small.
Yes, the output type is rail-to-rail, allowing the signal to swing close to both supply rails.
The ADA4500-2ARMZ is a functional peer with similar supply range and temperature grade, though its 10 MHz GBW and 5.5 V/µs slew rate are lower. The AD8646ARZ offers 24 MHz GBW and 11 V/µs slew rate but has higher input offset voltage (600 µV). The ADA4841-2YRMZ-R7 provides 80 MHz GBW and 13 V/µs slew rate with lower offset (40 µV) but draws 1.2 mA per channel — nearly 5× the supply current. None are pin-compatible; each requires a board layout review.