Skip to main content
Log in
Analog Devices LTC2918HMS-A1#PBF — Power Management (PMIC / Gate Driver)

LTC2918HMS-A1#PBF Multi-Voltage Supervisor, 10-MSOP

MPNLTC2918HMS-A1#PBF
End of Life

Analog Devices LTC2918HMS-A1#PBF multi-voltage supervisor, 1-channel, active-low open-drain reset, 150ms minimum reset timeout, 27 selectable threshold combinations, 10-MSOP package, -40°C to 125°C operating temperature.

$5.03Ref. price · indicative, final on quote
Packaging10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LTC2918HMS-A1#PBF specifications
ParameterValue
TypeMulti-Voltage Supervisor
MountingSurface Mount
Voltage - threshold27 Selectable Threshold Combinations
Number of voltages monitored1
Operating temperature-40°C ~ 125°C (TA)
ResetActive Low
OutputOpen Drain or Open Collector
PackageTube
Reset timeout150ms Minimum
Case10-TFSOP, 10-MSOP (0.118\", 3.00mm Width)

Product details

Single-channel supervisor with 27 threshold options

The LTC2918HMS-A1#PBF: It offers 27 selectable threshold combinations, letting you set the trip point without external resistor dividers — useful when the BOM must stay tight and the board layout is already dense. The reset timeout is a minimum of 150 ms, which gives the downstream supply and oscillator time to settle before the processor releases from reset.

Industrial temperature range and package

It comes in a 10-MSOP package (3.00 mm width, TFSOP/MSOP footprint), surface-mount only — the small body fits on mixed-signal boards where supervisor and converter share the same side of the board.

Frequently asked questions

What is the reset output type on LTC2918HMS-A1#PBF?

The reset output is active-low, open-drain or open-collector. This means it pulls low when the monitored voltage falls below the threshold and requires an external pull-up resistor to the logic supply rail.