Analog Devices LTC2292CUP#PBF, 12-bit pipelined ADC, dual 40 MSps, differential/single-ended input, parallel interface, 64-WFQFN exposed pad, 0°C to 70°C.
| Parameter | Value |
|---|---|
| Input type | Differential, Single Ended |
| Mounting | Surface Mount |
| Reference type | External, Internal |
| Voltage - supply, analog | 2.7V ~ 3.4V |
| Voltage - supply, digital | 2.7V ~ 3.4V |
| I/O channels | 2 |
| Data interface | Parallel |
| Operating temperature | 0°C ~ 70°C |
| Package | Tube |
| Features | Simultaneous Sampling |
| Architecture | Pipelined |
| Configuration | S/H-ADC |
| Number of bits | 12 |
| Case | 64-WFQFN Exposed Pad |
| Ratio - s (H:ADC) | 1:1 |
| Number of a (D converters) | 2 |
| Sampling rate (Per second) | 40M |
It accepts both differential and single-ended inputs through a shared S/H-ADC front end, and outputs data over a parallel interface.
It belongs in lab instrumentation, bench-top test gear, base-station receiver cards in climate-controlled shelters, or any indoor rack where the ambient stays above freezing.
The LTC2292CUP#PBF samples each of its two channels simultaneously at 40 MSps.
No direct pin-compatible second source is listed. The AD9204BCPZ-40 is a 10-bit dual 40 MSps pipelined ADC with simultaneous sampling but runs on a 1.8 V supply and covers -40°C to 85°C — it is a functional alternative only if the resolution and supply voltage can change. The AD9200JRSZ is a single-channel 10-bit 20 MSps part and is not a dual-channel replacement.