Analog Devices LT6658BHMSE-5#PBF, series dual voltage reference, fixed 5 V output, ±0.1% tolerance, 150 mA output, 20 ppm/°C drift, -40°C to 125°C junction temp, 16-MSOP-EP exposed pad, tube.
| Parameter | Value |
|---|---|
| Output type | Adjustable (Fixed) |
| Mounting | Surface Mount |
| Reference type | Series, Dual |
| Voltage - input | 5.2V ~ 36V |
| Voltage - output | 6 V |
| Voltage - output (Min (Fixed)) | 5V |
| Output current | 150 mA |
| Current - supply | 3mA |
| Operating temperature | -40°C ~ 125°C (TJ) |
| Package | Tube |
| Tolerance | ±0.1% |
| Case | 16-TFSOP (0.118\", 3.00mm Width) Exposed Pad |
| Noise - 0.1Hz to 10Hz | 2.2ppmp-p |
| Noise - 10Hz to 10kHz | 2ppmrms |
| Temperature coefficient | 20ppm/°C |
The dual-series architecture means both outputs are derived from the same buried-Zener core, so they track each other over temperature and load. Each output is independently buffered and can source 150 mA. The part is also adjustable up to 6 V via external resistors, though the fixed 5 V version (the -5 suffix) is the most common order.
ROHS3 compliance is confirmed.
The difference is the package suffix: 'E' in 'BHMSE' denotes the 16-TFSOP (0.118", 3.00 mm Width) exposed pad package, while 'BHMS' denotes a standard 16-MSOP without exposed pad. The exposed pad version (BHMSE) is recommended for applications drawing higher output current where thermal dissipation is a concern.
Lead time is confirmed at quote time against an RFQ. As an active part from Analog Devices, typical lead times through independent distribution are manageable, but current supply conditions vary. Submit an RFQ for a real-time lead-time commitment.