Skip to main content
Log in
Analog Devices LT1884CN8#PBF — Analog & Data Acquisition

LT1884CN8#PBF General Purpose Op-Amp, 2.2 MHz, Rail-to-Rail

MPNLT1884CN8#PBF
End of Life

Analog Devices LT® series, LT1884CN8#PBF, dual general-purpose op-amp in 8-DIP package. 2.2 MHz gain bandwidth, 1 V/µs slew rate, rail-to-rail output, 30 µV offset, 850 µA supply per channel, 2.7 V to 36 V supply range, 0°C to 70°C.

$8.53Ref. price · indicative, final on quote
Packaging8-DIP (0.300", 7.62mm)
RoHSROHS3 Compliant
SeriesLT®
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LT1884CN8#PBF specifications
ParameterValue
SeriesLT®
Output typeRail-to-Rail
MountingThrough Hole
Amplifier typeGeneral Purpose
Voltage - input offset30 µV
Voltage - supply span2.7 V
Current - supply850µA (x2 Channels)
Current - input bias150 pA
Current - output (Channel)50 mA
Operating temperature0°C ~ 70°C
Gain bandwidth product2.2 MHz
PackageTube
Slew rate1V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits2

Product details

What this dual op-amp brings to the board

The LT1884CN8#PBF is a dual, general-purpose op-amp from the LT® series, packaged in an 8-DIP through-hole body. Input offset voltage is trimmed to 30 µV, so you can skip external nulling in most precision DC paths. Supply current sits at 850 µA per amplifier, making it a reasonable choice for multi-channel boards where the power budget is tight but not sub-milliamp critical. Output can source or sink 50 mA per channel — enough to drive a modest headphone, an ADC reference buffer, or a relay coil through a series resistor. The 150 pA input bias current keeps errors low when working with high-impedance sources like photodiode amplifiers or pH probes.

Supply range and single-supply operation

Rail-to-rail output means the signal can swing within millivolts of each rail, preserving dynamic range at low supply voltages.

It fits indoor equipment, benchtop instruments, office peripherals, and HVAC control panels.

No end-of-life notice has been issued. Through-hole DIP packages remain in steady demand for legacy-support and low-volume production runs, so availability through independent distribution is consistent.

Frequently asked questions

Can LT1884CN8#PBF work with a single supply?

Yes. The LT1884CN8#PBF operates from a single supply between 2.7 V and 36 V, and its rail-to-rail output allows the signal to swing close to both supply rails, making it suitable for single-supply designs.

What is the equivalent of LT1884CN8#PBF?

A close functional equivalent is the AD706JNZ, also a dual general-purpose op-amp in an 8-DIP package with a similar 0°C to 70°C temperature range. The AD706JNZ has a lower 800 kHz gain-bandwidth and 0.15 V/µs slew rate, so it is a better fit for lower-frequency applications where the LT1884CN8#PBF's 2.2 MHz bandwidth is not needed.