Triple current-feedback amplifier with 1600 V/µs slew rate
The Analog Devices LT1260CS#TRPBF is a triple current-feedback operational amplifier designed for high-speed signal conditioning, video distribution, and pulse amplification where fast settling and wide bandwidth are critical. Its 1600 V/µs slew rate and 130 MHz -3 dB bandwidth let it handle large-signal transients without the slew-induced distortion that limits voltage-feedback amplifiers at similar gain. Each of the three channels draws 5 mA supply current, making the total quiescent draw 15 mA — a reasonable power budget for a multi-channel video line driver or ADC front end. The current-feedback topology means bandwidth stays relatively flat across gain settings, so you don't trade speed for closed-loop gain the way you would with a conventional op-amp.
The LT1260CS#TRPBF operates from a single or split supply spanning 4 V to 30 V total. Each channel can deliver 60 mA output current, enough to drive a 75 Ω video load or a moderate capacitive load like a coaxial cable or an ADC input. The 20 µA input bias current is typical for a current-feedback input stage — expect a few millivolts of offset due to the bias current flowing through source resistance, so balance the impedance at both inputs.
Commercial temperature range and package
The supplier device package is 16-SO.