Skip to main content
Log in
Analog Devices LT1224CN8#PBF — Analog & Data Acquisition

LT1224CN8#PBF Linear Technology Op Amp, 400V/µs Slew Rate

MPNLT1224CN8#PBF
End of Life

Linear Technology LT1224CN8#PBF, General Purpose Op Amp, 1 Circuit, 8-DIP Through Hole, 45 MHz Gain Bandwidth, 400V/µs Slew Rate, 7 mA Supply, 0°C to 70°C.

$9.64Ref. price · indicative, final on quote
Packaging8-DIP (0.300", 7.62mm)
RoHSROHS3 Compliant
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LT1224CN8#PBF specifications
ParameterValue
MountingThrough Hole
Amplifier typeGeneral Purpose
Voltage - input offset500 µV
Voltage - supply span30 V
Current - supply7mA
Current - input bias4 µA
Operating temperature0°C ~ 70°C
Gain bandwidth product45 MHz
PackageTube
Slew rate400V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits1

Product details

High-speed through-hole op amp for bench and board repair

The LT1224CN8#PBF from Linear Technology is a single-channel general-purpose op amp built for speed — 400V/µs slew rate and 45 MHz gain bandwidth in a through-hole 8-DIP package. That slew rate tells you this part was designed for video distribution, pulse amplification, or fast data-acquisition front ends where the signal edge has to stay clean. The 8-DIP (0.300", 7.62mm) body is a repair-bench favorite: it sockets cleanly, takes a logic analyzer clip, and swaps without lifting a pad. Supply span runs from 5 V to 30 V single or dual rails, drawing 7 mA quiescent.

400V/µs — what that slew rate buys you

Slew rate is 400V/µs. Gain bandwidth product is 45 MHz.

Lifecycle status is active. ROHS3 compliant.

Frequently asked questions

What is the pin configuration and package type of LT1224CN8#PBF?

It comes in an 8-DIP (0.300", 7.62mm) through-hole package, supplier device package 8-PDID. Standard pinout: offset null (1, 5), inverting input (2), non-inverting input (3), V− (4), output (6), V+ (7), no connect (8).

What are the equivalent or replacement parts for LT1224CN8#PBF?

The AD827JNZ is a dual-channel alternative in the same 8-DIP package with 50 MHz GBW and 300V/µs slew rate, but it uses two amplifiers and has slightly lower slew rate. For a single-channel surface-mount option, the AD847JRZ-REEL7 offers 50 MHz GBW and 300V/µs in an SOIC package. Neither is a direct pin-for-pin replacement; check your circuit's compensation and supply requirements.

Can LT1224CN8#PBF be used as a comparator?

It is a general-purpose op amp, not designed for comparator duty. The input stage has no latch-up protection, and the output stage is not optimized for the open-loop switching speeds a comparator demands. Use a dedicated comparator IC for reliable threshold detection.

Where can I buy LT1224CN8#PBF?

Sourced and quoted to order through independent distribution. Availability and pricing confirmed at quote time.