Skip to main content
Analog Devices LT1057S8#TRPBF — Analog & Data Acquisition

LT1057S8#TRPBF Dual JFET Op-Amp, 5 MHz, 13 V/µs, SOIC-8

MPNLT1057S8#TRPBF
End of Life

Linear Technology LT® series, LT1057S8#TRPBF, dual JFET operational amplifier, 5 MHz gain bandwidth, 13 V/µs slew rate, 7 pA input bias, 20 V to 36 V supply, 8-SOIC package, 0°C to 70°C.

$7.72Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
RoHSROHS3 Compliant
SeriesLT®
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

LT1057S8#TRPBF specifications
ParameterValue
SeriesLT®
MountingSurface Mount
Amplifier typeJ-FET
Voltage - input offset220 µV
Voltage - supply span36 V
Current - supply1.7mA (x2 Channels)
Current - input bias7 pA
Operating temperature0°C ~ 70°C
Gain bandwidth product5 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate13V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Dual JFET op-amp, 5 MHz, 13 V/µs — SOIC-8

The LT1057S8#TRPBF from Linear Technology (LT® series) is a dual JFET-input operational amplifier in an 8-pin SOIC package. Supply range spans 20 V to 36 V total, supporting single-supply operation from 20 V to 36 V or dual supplies up to ±18 V. Each of the two channels draws 1.7 mA supply current.

Supply voltage range — 20 V to 36 V total

The minimum supply span is 20 V and the maximum is 36 V. For a single-rail design that means a 24 V industrial bus or a 28 V avionics rail fits cleanly; for split supplies, ±10 V to ±18 V works.

Input bias current — 7 pA typical

The JFET front end keeps input bias at 7 pA typical. That matters for high-impedance sources like photodiode transimpedance stages, pH probe buffers, or precision integrators where bias current drift would swamp the signal. The 220 µV offset is also tight enough for most 12-bit signal chains without autozero.

Lifecycle — active, no LTB flag

No last-time-buy notice, no NRND designation. ROHS3 compliant.

Sourcing — quoted to order

Available through independent distribution. We source and quote this exact reel variant (TR suffix = Tape & Reel) against an RFQ.

Frequently asked questions

What is the typical input bias current for LT1057S8#TRPBF?

Typical input bias current is 7 pA, thanks to the JFET input stage.