Maxim Integrated IH5049CPE+, dual SPST-NO analog switch, 75Ohm max on-resistance, 10pC charge injection, ±4.5V to ±20V dual supply, 16-DIP through-hole package.
| Parameter | Value |
|---|---|
| Mounting | Through Hole |
| Voltage - supply, dual (V±) | ±4.5V ~ 20V |
| Current - leakage (IS(off)) | 100nA |
| Operating temperature | 0°C ~ 70°C (TA) |
| Package | Tube |
| Case | 16-DIP (0.300\", 7.62mm) |
| Switch circuit | SPST - NO |
| Charge injection | 10pC |
| Number of circuits | 2 |
| On-State resistance | 75Ohm |
| Switch time (Ton, toff) | 600ns, 300ns (Typ) |
| Multiplexer (Demultiplexer circuit) | 1:1 |
| Channel-to-Channel matching (ΔRon) | 8Ohm |
The 75 ohm maximum on-resistance sets the series impedance the signal sees through the switch. The 8 ohm channel-to-channel matching keeps gain errors consistent across the two channels.
The ±4.5 V to ±20 V dual-supply range covers the common analog rails found in test equipment, data acquisition, and industrial control boards. The 10 pC charge injection is the amount of charge dumped onto the load when the switch turns off.
Lifecycle status affects availability and long-term design viability.
On-resistance determines signal attenuation and power dissipation in the switch.
Correct pin mapping is essential for PCB layout and replacement.
Stock availability affects lead time and production schedules.
Price per unit impacts BOM cost and budget planning.
Finding drop-in alternatives ensures supply chain flexibility.