Maxim DS2154L-C01, Single Chip Transceiver, Full Duplex, 1/1 Drivers/Receivers, 4.75V ~ 5.25V Supply, 0°C ~ 70°C, 100-LQFP (14x14).
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Mounting | Surface Mount |
| Supply voltage | 4.75V ~ 5.25V |
| Protocol | E1 |
| Operating temperature | 0°C ~ 70°C (TA) |
| Duplex | Full |
| Package | Bulk |
| Case | 100-LQFP |
| Number of drivers (Receivers) | 1/1 |
The DS2154L-C01 is a single-chip transceiver handling full-duplex communication over a single line. It integrates the line interface unit (LIU), framer, and controller into one 100-LQFP package.
One driver and one receiver pair means this transceiver is sized for a single port. The full-duplex capability allows simultaneous transmit and receive on the same twisted pair.
The DS2154L-C01 is an transceiver. interfaces typically use 75 ohm coaxial cable (for unbalanced lines) or 120 ohm twisted pair (balanced). The datasheet specifies the line interface requirements; verify the receiver input impedance and transmitter output drive against your line impedance before design-in.
No official replacement or cross-reference is listed for the DS2154L-C01. As an active part, it does not have a successor. For a second source, evaluate other single-chip transceivers in a 100-LQFP package with a 5V supply and full-duplex operation, and compare feature compatibility directly.