Maxim Integrated DS1818-10+ EconoReset Simple Reset/Power-On Reset IC, 2.88V threshold, active-low open-drain output, 100ms timeout, TO-92-3 through-hole, -40°C to +85°C.
| Parameter | Value |
|---|---|
| Type | Simple Reset/Power-On Reset |
| Series | EconoReset |
| Mounting | Through Hole |
| Voltage - threshold | 2.88V |
| Number of voltages monitored | 1 |
| Operating temperature | -40°C ~ 85°C (TA) |
| Reset | Active Low |
| Output | Open Drain or Open Collector |
| Package | Bulk |
| Reset timeout | 100ms Minimum |
| Case | TO-226-3, TO-92-3 (TO-226AA) |
The DS1818-10+ is a single-channel reset supervisor from Maxim's EconoReset series, monitoring a single voltage rail with a 2.88V threshold.
Housed in a TO-92-3 (TO-226AA) through-hole package, the DS1818-10+ is a three-pin device that drops into existing socket or solder-hole layouts without a board spin.
Yes, the output is open drain or open collector, active low. This allows the reset signal to be wire-ORed with other open-drain outputs on the same pull-up rail.
The DS1818-10+ uses a standard TO-92-3 pinout: ground, reset output, and VCC. The exact pin assignment is in the manufacturer's datasheet — confirm the orientation against your PCB footprint before assembly.