5000 Vrms isolation with onboard DC-DC — one package, two functions
That means this 16-SOIC package replaces both a signal isolator and a separate isolated power module, saving board area and simplifying the safety-certification bill of materials. The magnetic coupling technology delivers 5000 Vrms of galvanic isolation, rated for reinforced insulation in medical and industrial equipment where the isolation barrier must survive fault conditions. Data rate is 25 Mbps, fast enough for isolated SPI, UART, or CAN transceiver interfaces in motor drives, PLC I/O modules, and grid-tied inverters. The unidirectional channel configuration (2 inputs on side 1, 0 on side 2) suits applications where data flows one way across the barrier — for example, gate-drive signals from a controller to a power stage, or sensor readings from a high-voltage domain back to the control board.
25 kV/µs CMTI — keeps the link alive in noisy environments
Common-mode transient immunity is specified at a minimum of 25 kV/µs, which means fast voltage swings on one side of the barrier — like the switching node of a half-bridge or the relay coil kickback — won't corrupt the data on the other side. In practice, this lets the isolator sit between a PWM controller and an IGBT gate driver without losing sync during hard switching events. The 2.5 ns typical rise and fall times contribute to clean signal edges at 25 Mbps, and the 6 ns maximum pulse-width distortion keeps the duty cycle accurate for pulse-based protocols like PWM or one-wire interfaces.
Active lifecycle — no end-of-life clock ticking
ROHS3 compliant. If you need a dual-channel isolator with integrated power and 5000 Vrms isolation, this is a stable, production-available choice.