It is ROHS3 compliant, meeting current environmental requirements for EU and global markets.
The 5000Vrms isolation rating qualifies this part for reinforced isolation in medical equipment, industrial drives, and grid-tied power converters where safety standards demand a robust barrier. The 25kV/µs common-mode transient immunity (CMTI) handles the fast switching edges of SiC and GaN power stages without data corruption.
10Mbps unidirectional — fits SPI and UART isolation
Four unidirectional channels at 10Mbps with 50ns max propagation delay and 3ns pulse-width distortion are well matched to isolating SPI buses (SCLK, MOSI, MISO, CS) or UART signals. The 2.5ns typical rise/fall times keep signal integrity clean across the barrier.
Operates from 2.7V to 5.5V on each side, allowing direct interface with 3.3V and 5V logic domains without level shifters.
Package and footprint
Housed in a 16-pin SOIC wide-body (0.295", 7.50mm width) — the larger creepage distance supports the 5000Vrms rating. Surface-mount, hand-solderable with a fine tip or hot air. No isolated power on-chip; external DC-DC or a separate isolated supply is needed for the secondary side.