Analog Devices ADM3061EARZ, RS-485 transceiver, half-duplex, 1/1 driver/receiver, 500 kbps data rate, 3 V to 5.5 V supply, 30 mV receiver hysteresis, -40°C to 85°C, surface mount 8-SOIC package, tube, ROHS3 compliant, active.
| Parameter | Value |
|---|---|
| Type | Transceiver |
| Mounting | Surface Mount |
| Supply voltage | 3V ~ 5.5V |
| Protocol | RS485 |
| Operating temperature | -40°C ~ 85°C |
| Duplex | Half |
| Package | Tube |
| Data rate | 500kbps |
| Case | 8-SOIC (0.154\", 3.90mm Width) |
| Receiver hysteresis | 30 mV |
| Number of drivers (Receivers) | 1/1 |
Data rate is 500 kbps. Supply range is 3 V to 5.5 V. Receiver hysteresis is specified at 30 mV, which gives the bus input a noise-rejection floor — useful when the cable runs through a motor-drive cabinet or alongside switching power supplies.
Package is 8-SOIC (0.154" body width, 3.90 mm). Supplier device package is 8-SOIC.
Product status is Active. ROHS3 compliant.
Yes, the supply voltage range is 3 V to 5.5 V, so 3.3 V operation is fully specified. The receiver outputs swing rail-to-rail, so at 3.3 V VCC the logic levels are 3.3 V CMOS-compatible.
The closest functional equivalent is the ADM3061EBRZ, which is the same RS-485 half-duplex transceiver at 500 kbps but rated for -40°C to 125°C instead of -40°C to 85°C. If you need the wider temperature range, the EBRZ is a direct pin-compatible swap. The ADM3061EARZ-R7 and ADM3061EARMZ-R7 are tape-and-reel variants of the same die, same temperature grade.
Yes, it is ROHS3 compliant.