Skip to main content
Analog Devices AD8656ARZ-REEL — Memory (DRAM / SRAM / Flash / EEPROM)

AD8656ARZ-REEL CMOS Op-Amp, 28 MHz GBW, Rail-to-Rail Output

MPNAD8656ARZ-REEL
End of Life

Analog Devices DigiTrim® series, AD8656ARZ-REEL dual CMOS op-amp, 28 MHz gain bandwidth, 11 V/µs slew rate, rail-to-rail output, 2.7 V to 5.5 V supply, 8-SOIC package, -40°C to 125°C.

$4.69Ref. price · indicative, final on quote
Packaging8-SOIC (0.154", 3.90mm Width)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

AD8656ARZ-REEL Technical Specifications
ParameterValue
SeriesDigiTrim®
Output typeRail-to-Rail
Mounting typeSurface Mount
Amplifier typeCMOS
Voltage - input offset50 µV
Voltage - supply span5.5 V
Current - supply3.7mA (x2 Channels)
Current - input bias1 pA
Current - output (Channel)220 mA
Operating temperature-40°C ~ 125°C
Gain bandwidth product28 MHz
PackageTape & Reel (TR); Cut Tape (CT)
Slew rate11V/µs
Case8-SOIC (0.154\", 3.90mm Width)
Number of circuits2

Product details

Two-channel CMOS op-amp with 28 MHz GBW

The AD8656ARZ-REEL from Analog Devices is a dual CMOS operational amplifier from the DigiTrim® series, offering a gain bandwidth product of 28 MHz and a slew rate of 11 V/µs. It operates from a single supply spanning 2.7 V to 5.5 V, draws 3.7 mA per channel, and delivers rail-to-rail output swing. The input bias current is 1 pA, making it suited for high-impedance sensor interfaces, photodiode amplifiers, and battery-powered instrumentation. The part is housed in an 8-SOIC package and rated for the industrial temperature range of -40°C to 125°C.

28 MHz GBW and 11 V/µs slew rate — signal chain fit

The 28 MHz gain bandwidth product and 11 V/µs slew rate suit fast ADC drivers and active filters.

Active production, no end-of-life concern

The AD8656ARZ-REEL carries an Active lifecycle status with ROHS3 compliance. No last-time-buy or obsolescence notice is in effect. The part is available through independent distribution and can be quoted to order against an RFQ.

Supply range and rail-to-rail output

The 2.7 V to 5.5 V supply span covers single-rail systems. Rail-to-rail output swing maximizes dynamic range.

Frequently asked questions

What is the gain bandwidth product of AD8656ARZ-REEL?

The gain bandwidth product is 28 MHz.

What is the difference between AD8656ARZ and AD8656ARZ-REEL?

The AD8656ARZ-REEL suffix indicates Tape & Reel packaging; the AD8656ARZ base part is the same die and performance, typically supplied in tube or cut tape. The electrical specifications are identical.

What are equivalent op-amps to AD8656ARZ-REEL?

Within the same DigiTrim® family, the AD8652ARZ-REEL7 offers higher speed (50 MHz GBW, 41 V/µs slew rate) at higher supply current (17.5 mA per channel), while the AD8604ARZ-REEL is a quad version with lower bandwidth (8.4 MHz) and lower quiescent current (0.8 mA per channel). Both are pin-compatible in 8-SOIC for dual or quad configurations.

Is AD8656ARZ-REEL a rail-to-rail op amp?

Yes, the output type is rail-to-rail.