High-speed dual op-amp in a small footprint
The Analog Devices AD8062ARMZ is a dual voltage-feedback operational amplifier in an 8-MSOP package, delivering a 320 MHz -3 dB bandwidth and a 650 V/µs slew rate. Typical applications include video amplification, ADC drivers, and pulse shaping in test equipment or communications gear, with the dual-channel configuration saving board space over two single op-amps.
The 650 V/µs slew rate means the output can swing 6.5 V in 10 ns, which keeps large-signal distortion low up to several tens of MHz. Combined with the 320 MHz -3 dB bandwidth, this part handles fast edges in video lines (e.g., 720p/1080i component video) or high-speed data converter front-ends without excessive settling time. The 50 mA output current per channel gives enough drive for 50 Ω or 75 Ω terminated lines, though for heavier loads you'll want to check the thermal limits in the 8-MSOP package.
Supply range and rail-to-rail output
The rail-to-rail output stage lets the amplifier swing within millivolts of each rail, preserving dynamic range when the supply is tight. Input offset voltage is 1 mV typical, and input bias current runs 3.5 µA — fine for moderate-impedance sources but not for high-Z sensor interfaces without buffering.
Active production, no obsolescence worry
It is ROHS3 compliant.