Skip to main content
Analog Devices AD745JN — Memory (DRAM / SRAM / Flash / EEPROM)
Analog Devices

AD745JN JFET Op-Amp, 20 MHz, 12 V/µs, 8-DIP

MPNAD745JN
End of Life

Analog Devices AD745JN, JFET-input operational amplifier, single circuit, 20 MHz gain-bandwidth product, 12 V/µs slew rate, 8-DIP through-hole package, 9.6 V to 36 V supply, 0°C to 70°C.

$5.64Ref. price · indicative, final on quote
AD745JN datasheet
Packaging8-DIP (0.300", 7.62mm)
StockContact for availability
MOQ1 pcs
  • 100% new & originalTraceable channels only — no refurbs, no pulls, no remarked parts.
  • Date & lot codes on quoteStated per line before you commit; label photos on request.
  • MSL-compliant ESD packingMoisture-sealed bags with indicator cards; reels photo-verified.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.

Specifications

AD745JN Technical Specifications
ParameterValue
Mounting typeThrough Hole
Amplifier typeJ-FET
Voltage - input offset250 µV
Voltage - supply span9.6 V
Current - supply8mA
Current - input bias150 pA
Current - output (Channel)40 mA
Operating temperature0°C ~ 70°C
-3db bandwidth20 MHz
Gain bandwidth product20 MHz
PackageBulk
Slew rate12V/µs
Case8-DIP (0.300\", 7.62mm)
Number of circuits1

Product details

JFET op-amp in an 8-DIP — what it brings to the board

The AD745JN is a single JFET-input operational amplifier from Analog Devices in an 8-pin DIP through-hole package. It delivers a 20 MHz gain-bandwidth product and a 12 V/µs slew rate, supplied from a single or dual rail spanning 9.6 V to 36 V total. The JFET input stage keeps input bias current at 150 pA. Output can source or sink 40 mA. The 8 mA supply current is moderate for this speed grade.

Active production — no end-of-life watch needed

The AD745JN carries an Active lifecycle status. No last-time-buy window, no NRND flag. For new designs or MRO replenishment on existing boards, the supply channel is stable. The part is RoHS non-compliant (lead-bearing terminations), so verify your assembly house's exemption status if you are still running SnPb solder — otherwise the AD745JN is a drop-in for legacy through-hole sockets without process change.

Sourcing this line item

The AD745JN is available to order through independent distribution. Availability and current pricing are confirmed at quote time against an RFQ. If your BOM calls for this exact order code — single JFET op-amp, 8-DIP, 20 MHz — we can source it.

Frequently asked questions

What is the exact replacement or equivalent for AD745JN?

There is no single direct replacement announced by Analog Devices. The AD712KNZ is a dual JFET op-amp with 4 MHz GBW and 20 V/µs slew rate in a through-hole package — a functional alternative if your circuit can accept two amplifiers and a different speed/slew profile. The AD711JRZ-REEL7 is a single-channel surface-mount option with 4 MHz / 20 V/µs. Neither is a pin-for-pin drop-in; verify the pinout and compensation before substituting.

What are the complete specifications and pinout of AD745JN?

Key specifications: JFET amplifier type, single circuit, 20 MHz gain-bandwidth product, 12 V/µs slew rate, 150 pA input bias current, 250 µV input offset voltage, 8 mA supply current, 40 mA output current per channel, supply range 9.6 V to 36 V, operating temperature 0°C to 70°C. Package: 8-DIP (0.300", 7.62 mm), supplier device package 8-PDIP. The standard 8-pin DIP pinout applies: offset null (1 and 5), inverting input (2), non-inverting input (3), V- (4), output (6), V+ (7), and NC (8).

Can AD745JN be replaced by a common op-amp like TL071 or LF356?

The TL071 and LF356 are both JFET-input op-amps in 8-DIP packages, making them footprint-compatible. However, the AD745JN offers a higher gain-bandwidth product (20 MHz vs 3-4 MHz typical for TL071/LF356) and a different slew rate. For a direct replacement in a circuit that relies on the AD745JN's 20 MHz bandwidth, the TL071 or LF356 will roll off earlier. For slower or DC-precision circuits, they may work after checking supply range and offset voltage.