Skip to main content
KYOCERA AVX TPSB105K035R2000 — Specialty Capacitors

TPSB105K035R2000 KYOCERA AVX ตัวเก็บประจุแทนทาลัมแบบขึ้นรูป 1 µF 35 V

MPNTPSB105K035R2000
Active

KYOCERA AVX ซีรีส์ TPS ตัวเก็บประจุแทนทาลัมแบบขึ้นรูป 1 µF ±10% แรงดันพิกัด 35 V ESR 2 Ohm -55°C ถึง 125°C ตัวเรือน 1411 (3528 Metric) กำลังอยู่ในช่วงการผลิต

$0.50448Price · pay online now
Buy Now

$0.50 / ea

6 in stock — maximum per order · 3–4 days lead time

Independent supplier — new & surplus stockAuthenticity-screened · ESD-safe packingListing updated Sep 2026

Specifications

TPSB105K035R2000 specifications
ParameterValue
TypeMolded
SeriesTPS
MountingSurface Mount
ESR2Ohm
Voltage - rated35 V
Operating temperature-55°C ~ 125°C
Size (Dimension)0.138\" L x 0.110\" W (3.50mm x 2.80mm)
Height - seated0.083\" (2.10mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesGeneral Purpose
Tolerance±10%
Capacitance1 µF
Case1411 (3528 Metric), 1210
Manufacturer size codeB

Product details

1 µF ที่ 35 V — การดีคัปปลิงแบบ bulk บนรางไฟ 24 V

TPSB105K035R2000: พิกัด 1 µF ที่ 35 V ค่าความคลาดเคลื่อน ±10% ตัวเก็บประจุแทนทาลัมแบบขึ้นรูปตัวนี้เหมาะสำหรับการดีคัปปลิงแบบ bulk หรือฟิลเตอร์เอาต์พุตบนรางจ่ายไฟ 24 V พิกัด 35 V ให้มาร์จินเหนือรางไฟตามพิกัด ช่วยลดข้อกังวลเรื่องดีเรตในสภาวะการทำงานคงที่ ในฟิลเตอร์เอาต์พุตของแหล่งจ่ายไฟ ESR ครองแรงดันริปเปิลเอาต์พุต — กระแสริปเปิล 100 mA สร้างแรงดันริปเปิล 200 mV คร่อมตัวเก็บประจุ

บรรจุในตัวเรือนแบบขึ้นรูป 1411 (3528 Metric) รหัสขนาด B ตัวเก็บประจุมีขนาด 3.50 mm x 2.80 mm ความสูงนั่งสูงสุด 2.10 mm ฟุตพรินต์ยึดพื้นผิวตรงกับแพดบัดกรี 1210 มาตรฐาน — ไม่ต้องใช้ via-in-pad หรือการจัดวางพิเศษ

Frequently asked questions

Is TPSB105K035R2000 RoHS and REACH compliant?

The part is listed with general-purpose features and is a molded tantalum type from the TPS series. KYOCERA AVX typically qualifies these as RoHS and REACH compliant, but the specific compliance statement should be confirmed on the manufacturer's product page or certificate of compliance.

Can TPSB105K035R2000 be used as a replacement for a failed capacitor on a board?

If the original capacitor is a 1 µF, 35 V, ±10% molded tantalum in a 1411 (3528 Metric) case, this part is a direct replacement. Verify the ESR of the original — if it was higher than 2 Ohm, the lower ESR here may reduce ripple but also increase inrush current at power-up.