SN75LBC175AD

Texas Instruments

Texas Instruments SN75LBC175AD, quad differential line receiver, RS-422/423/485, 50 Mbps data rate, 40 mV hysteresis, 4.75 V to 5.25 V supply, 16-SOIC surface-mount package, commercial temperature range 0 °C to 70 °C.

Texas Instruments SN75LBC175AD
Download datasheet (PDF)
[ALLOC] Allocation Sourcing · Shortage Support
$10.82/ pc

Volume pricing

Buy Now

MOQ 1 · Tube · RoHS · EIA-481 · DAP/DDP · T/T

Technical specifications

SN75LBC175AD specifications
Parameter / AttributeSpecification / Value
TypeReceiver
MountingSurface Mount
Supply voltage4.75V ~ 5.25V
ProtocolRS422, RS423, RS485
Operating temperature0°C ~ 70°C
PackageTube
Data rate50Mbps
Case16-SOIC (0.154\", 3.90mm Width)
Receiver hysteresis40 mV
Number of drivers (Receivers)0/4

Technical details

Quad RS-485 receiver for 5 V differential buses

The SN75LBC175AD is a quad differential line receiver from Texas Instruments, designed for balanced multipoint buses using RS-422, RS-423, or RS-485 protocols. It handles data rates up to 50 Mbps, making it suitable for high-speed factory-floor links, building automation backbones, and instrumentation networks where the bus is differential and the common-mode range needs to handle ground shifts.

That 250 mV guard band on each side means a well-regulated 5 V rail is expected — don't count on this receiver running from a 3.3 V bus or from a loosely regulated 5 V rail that dips below 4.75 V under load. That limits the part to indoor, conditioned environments — not for engine bays, outdoor telecom cabinets, or unheated warehouses. If the ambient on your panel regularly touches 85 °C, this is not the receiver for that slot.

The narrow SOIC width keeps the pin-to-pin capacitance low, which helps maintain signal integrity at 50 Mbps edge rates. For reel quantities, check the 'D' suffix variant or the tape-and-reel order code if your pick-and-place line prefers reels.

SN75LBC175AD
[ALLOC] verified
Quote