Skip to main content
KYOCERA AVX TPSC107K010H0100 — Specialty Capacitors

TPSC107K010H0100 KYOCERA AVX формованный танталовый конденсатор 100 µF

MPNTPSC107K010H0100
Active

KYOCERA AVX, серия TPS, формованный танталовый чип, 100 µF ±10%, номинальное напряжение 10 V, ESR 100 mOhm, корпус 2312 (6032 Metric), рабочий диапазон от -55°C до 125°C.

Независимый поставщик — новые и оригинальные компонентыПроверка подлинности · антистатическая упаковка ESDОбновлено: Sep 2026

Характеристики

TPSC107K010H0100 specifications
ParameterValue
TypeMolded
SeriesTPS
MountingSurface Mount
ESR100mOhm
Voltage - rated10 V
Operating temperature-55°C ~ 125°C
Size (Dimension)0.236\" L x 0.126\" W (6.00mm x 3.20mm)
Height - seated0.110\" (2.80mm)
PackageTape & Reel (TR) Cut Tape (CT)
FeaturesGeneral Purpose
Tolerance±10%
Capacitance100 µF
Case2312 (6032 Metric)
Manufacturer size codeC

Описание и документация

Компонент выпускается в формованном корпусе 2312 (6032 Metric), посадочное место 6,00 mm x 3,20 mm, максимальная высота установки 2,80 mm. Типоразмер C — стандартное посадочное место танталового чипа: расположение контактных площадок совпадает с распространённым рисунком 6032, поэтому для прямой замены (drop-in) другим конденсатором типоразмера C из серии TPS переделка платы не требуется.

Статус Active — без пометок NRND или EOL.

Frequently asked questions

How can I order TPSC107K010H0100 or check availability?

Submit an RFQ with your target quantity and date-code preference; we confirm pricing and lead time at quote. No stock-holding claim — every order is sourced per your BOM.

What is the ESR of TPSC107K010H0100?

The equivalent series resistance is 100 mOhm. This is the nominal value at 25°C and 100 kHz — the actual ESR rises with temperature and frequency, but the 100 mOhm floor keeps the ripple current capability high enough for typical 10 V rail decoupling.

Is TPSC107K010H0100 polarized?

Yes — like all tantalum electrolytics, it is polarized. The molded case is marked with a stripe on the positive (anode) end. Reverse voltage or AC ripple with a DC offset below zero will damage the dielectric; confirm the polarity orientation on your PCB footprint before assembly.