4000 V/µs slew rate, 500 MHz bandwidth — CFA in 8-SOIC
The EL5263ISZ is a dual-channel current-feedback operational amplifier from Renesas Electronics, delivering a 4000 V/µs slew rate and 500 MHz -3 dB bandwidth from a 5 V to 12 V supply span. Each channel draws 1.5 mA quiescent supply current and can source or sink 100 mA of output current, making it suited for high-speed signal conditioning where both bandwidth and drive are needed.
Supply range and temperature grade for industrial signal chains
Operating from a single or split supply between 5 V and 12 V, the EL5263ISZ covers the common ±5 V or single 5 V/12 V rails found in test equipment and communications infrastructure. Rated for -40°C to +85°C ambient, the industrial temperature grade allows deployment in outdoor telecom cabinets, factory-floor instrumentation, and automotive test benches without derating. Input offset voltage is 1.5 mV typical and input bias current is 2 µA — figures consistent with a current-feedback topology where the non-inverting input sees the signal directly.
Package and lifecycle — active production, standard footprint
Housed in an 8-SOIC package (0.154" width, 3.90 mm body), the EL5263ISZ uses the industry-standard SOIC-8 footprint shared by hundreds of op-amp types, simplifying PCB layout and second-sourcing. Supplied in tube packaging, the EL5263ISZ is suitable for manual assembly or low-volume pick-and-place; reel options may be available under alternate order codes if needed.