NXP LPC550x series ARM Cortex-M33 single-core MCU, 96 MHz, 64 KB Flash, 48 KB RAM, CAN Bus + Flexcomm, 7x16b SAR ADC, 30 GPIO, 48-VFQFN wettable flank, -40°C to 105°C, 1.8V–3.6V supply, tray.
| Parameter | Value |
|---|---|
| Series | LPC550x |
| Mounting | Surface Mount, Wettable Flank |
| Oscillator type | Internal |
| Program memory type | FLASH |
| Voltage - supply (Vcc (Vdd)) | 1.8V ~ 3.6V |
| Operating temperature | -40°C~105°C(TA) |
| Speed | 96MHz |
| Package | Tray |
| RAM size | 48K x 8 |
| Core size | 32-Bit Single-Core |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, POR, PWM, RNG, WDT |
| Connectivity | CANBus, Flexcomm, I²C, SPI, UART/USART |
| Number of i (O) | 30 |
| Core processor | ARM® Cortex®-M33 |
| Case | 48-VFQFN Exposed Pad |
| Data converters | A/D 7x16b SAR |
| Program memory size | 64KB (64K x 8) |
The NXP LPC5502JHI48QL is a 32-bit ARM Cortex-M33 single-core MCU from the LPC550x series, clocked at 96 MHz.
The CAN bus interface on the LPC5502JHI48QL is implemented through the Flexcomm block, which also handles I²C, SPI, and UART. The Flexcomm is a shared resource — only one serial protocol can be active on a given Flexcomm instance at a time.
No last-time-buy or discontinuation notice is on record.
Yes, it integrates a CAN bus interface through the Flexcomm block, supporting CAN 2.0A and 2.0B frames.
The package is a 48-VFQFN exposed pad with wettable flank, supplier device package 48-HVQFN (7x7 mm), surface mount.
It is rated for -40°C to 105°C ambient, suitable for industrial and automotive under-hood environments.
The core processor runs at 96 MHz, a 32-bit ARM Cortex-M33 single-core.