The NXP LPC54607J512ET180E is a 32-bit ARM Cortex-M4 single-core MCU running at 180 MHz, with 512 KB Flash, 200 KB SRAM, and 16 KB EEPROM emulation. The 180 MHz core gives you headroom for real-time control loops and signal processing without needing an external DSP.
Memory and peripheral set — sizing the design
The 200 KB SRAM is enough for moderate buffering and stack depth; if your application needs larger frame buffers or multiple protocol stacks, you will be looking at external memory or a higher-density sibling. The 16 KB EEPROM emulation block handles calibration constants and boot parameters without an external serial EEPROM — saves a component and a board trace. Peripherals include brown-out detect, DMA, I²S, LCD controller, POR, PWM, and WDT, so this MCU can drive a small display directly and handle sensor fusion without glue logic.