470 µF, 10 V, 200 mOhm ESR — bulk decoupling in a reworkable 2917
The TPSE477K010R0200: The molded body has a clear polarity band, so orientation is unambiguous under a hot-air station or during visual inspection.
Temperature range and rework considerations
Rated for -55°C to 125°C, this cap spans the full military temperature band — suitable for engine-bay electronics, downhole tools, or outdoor base stations that see -40°C dawn starts and 105°C solar soak. The molded epoxy body handles standard reflow profiles without cracking, and the polarity mark is legible after soldering. The manufacturer size code E confirms the case dimensions match the 2917 footprint. The tape-and-reel packaging (Cut Tape also available) means it feeds into a pick-and-place without manual handling, but a bench rework is straightforward — preheat the board to 100°C, hot-air at 300°C for 15 seconds, and lift the part without lifting the pad.